Programs high-density Flash memory devices at near
theoretical minimum programming times (Program + verify INTEL28F320W18,
32Mb less than 13.5s)
Standard 48 pin universal pin-drivers come
with universal package adapters to support all types of devices in same
package with a single adapter. No adapters are needed for DIL devices.
Universal adapters ensure rapid algorithm update. Device-specific
adapters are also available for devices above 48 pins that are amounted
on DIL48 module. Down to 1.5V low voltage devices are supported
directly, thanks to the DAC controlled I/O levels.
features minimized Bounce noise. Only IC manufacturers approved
algorithms are adopted. High yield rates are guaranteed for all devices
including low voltage, critical and second-hand devices. +5% and +10%
Vcc verification promises programming reliability.
In-System Programmable (ISP Support).
34,902 devices from up to 188 IC manufacturers including EPROM, EEPROM
and Flash memory, PIC, AVR and other popular microcontrollers and PLDs.
Free life-time software update.
Pin continuity and wrong chip insertion check prevent chips from accident damage.
Over-current and over-voltage protection for programmer hardware.
Software supports Windows 98/Me/NT/2000/XP.
friendly control software combines many powerful functions with ease of
use. Project minizes the whole process of device selection, file
loading, device configuration setting, operation option, batch file
setting etc. to a single step. History of device selection and file
loading simplify operatioin. Batch command combines device operations
like program, verify, security into a single command at any sequence.
Auto-start starts batch command automatically as soon as the chip is
detected to be inserted in the socket properly. Serial number can be
generated and programmed into devices automatically in anyway customer
specified. The correct device type will be suggested according to the
actual ID read when a mistake type is selected. With help of the open
API user can even change the buffer content from chip to chip.
Recognizes file formats and detects large file offset automatically.
Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA
Configuration Serial PROM, FLASH Memory (NOR and NAND), NVRAM, SPLD,
CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic.
Adapters Supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, VQFP, TSOP,
TSOPII, SOP, P SOP, TSSOP, SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP,
PC Interface: USB
Optional Accessories: Package Adapter
Hardware & Electrical Specifications
Power supply : Input 100V-240VAC, Output 12VDC
Programmer unit dimension : 320(L) x 300(W) x 85(H) mm
Gross shipping weight : 4 Lbs (1.8 kg)
SuperPro 580U Programmer