Windows 2000 professional or Windows XP professional or Windows Vista professional
IE 6.0 or 8.0.
The newest version: 2010 Version
Now software is on DVD. You can install it on any computer, not necessary must on Dell D630.
personal computer (PC) is connected to the MUTIII unit and used as a
system's control terminal, and communicates with a vehicle ECU through
the VCI. In addition to being able to handle all diagnosis functions
covered by the conventional MUT-II tester, the MUT-III system can
display data as easy-to-understand diagrams and graphs on a large screen
of the PC. Unlike the MUT-II, the MUT-III can retain data on all
vehicles, from old to new models, classified according to destination in
the PC's hard disk. This eliminates the awkward but essential job with
the MUT-II, of switching the data list (communications protocol data and
diagnosis item list database) by replacing the ROM pack with another
according to the vehicle model and year model.
functions that make use of the advantages of the PC are also being
developed. For example, the workshop manual viewer is a useful function
for mechanics as they no longer have to carry around a thick manual and
search for relevant pages while working on a vehicle. The workshop
manual viewer is currently available for certain vehicle models, and
allows users to retrieve the pages containing the failure code for a
particular problem at the push of a button.
1.Language including: English, Chinese, French, Spanish, Thai, Vietnamese, Czech, German, Greek, Italian, Turkish, and Russian.
2. Set Includes
(1) Vehicle Communication Interface (V.C.I.) (MB991824)
A communication interface used to connect the vehicle ECUs and the PC.
1) When connected with the PC
-Vehicle diagnosis (Interactive fault diagnosis)
-SWS communication; CAN communication support
-Volt, Ohm, measurement
-Fuel pressure measurement (Not available in US)
2)When used with the V.C.I. unit (disconnected from PC)
-V.C.I. Stand-alone diagnosis
-Volt, Ohm measurement
-Belt Tension measurement
(2) Memory Card
Stores data for ECU reprogramming, drive recorder, etc.
is a standard, off-the-shelf memory card. The one provided (with
reprogramming data) is a Compact Flash memory card (MB991853) inserted
into the CF card adapter (MB991939).
(3) M.U.T. -III Main Harness A (MB991910)
Used when connecting the V.C.I. with vehicles that have only one 16-pin diagnosis connector.
-Supports fault diagnosis and ECU updating on the above-described vehicles
-Supports the CAN communication system
(4) M.U.T.-III Main Harness B (MB991911)
Used when connecting V.C.I. with vehicles that have a16-pin + 12-pin or 16-pin + 13-pin diagnosis connector.
models equipped with only 12-pin (or 12-pin + 12-pin) diagnosis
connector, connect the M.U.T.-II adapter harness (MB991498) to the end
of this harness in the same as M.U.T.-II, and power is supplied from the
cigarette lighter socket.
(5) M.U.T.-III BOX